At Timik Engines, near Southampton in Hampshire, we specialise in remanufacturing quality diesel engines on-site. As proud members of the Federation of Engine Re-manufacturers, we ensure every engine meets the rigorous standards of BSI AU 257:2002, part of the British Standard Automobile Series.
The Perkins 1104C-44T is a 4-cylinder turbocharged diesel engine with 4.4 litres of displacement and direct injection. Part of the Perkins 1100 Series, the 1104C-44T is the turbocharged variant of the 1104 family, meeting Tier 2 and EU Stage II emissions standards. Engines with the RG build prefix are mechanical fuel system units using a Lucas DP 210 rotary injection pump, identified by a serial number beginning RG.
The 1104C-44T uses a 105mm bore and 127mm stroke, with a compression ratio of 18.2:1 and a firing order of 1-3-4-2. The addition of the turbocharger over the naturally aspirated 1104C-44 raises peak power to 100hp (74.5kW) at 2300rpm and maximum torque to 415Nm at 1350rpm, making it well suited to the higher power demands of telehandlers and backhoe loaders.
The 1100 Series design provides single-side service access and 500-hour service intervals throughout.
The RG38067 build is specified for JCB and Manitou applications, and can directly replace 1104C-44T engines in JCB backhoe loaders and Manitou telehandler ranges.
The engine block is bored back to standard with new liners fitted. The cylinder head is remanufactured with valve seats re-cut and new valves fitted. The crankshaft is ground to precise tolerances.
All engines are rebuilt in our clean workshop with new pistons and rings, bearings, oil pump, water pump, and complete gasket set. Fuel injection equipment is remanufactured and turbochargers replaced where applicable.
Every engine is dynamometer tested to confirm correct power output, oil pressure, and operating temperatures. Engines are painted and prepared for delivery with full documentation.