At Timik Engines, we specialise in the professional remanufacturing of Ford 7740 tractor engines, restoring them to peak performance and reliability. Every engine is meticulously rebuilt at our Hampshire facility by experienced technicians, adhering to the BSI AU 257:2002 code of practice, ensuring the highest standard of quality and durability.
The Ford 7740 was one of the standout models in the 40 Series, produced between 1991 and 1995. Featuring the robust Ford 5.0L, four-cylinder diesel engine, this tractor became a favourite among farmers and contractors due to its reliability, efficiency, and balance of power.
With an output of around 95-100 horsepower, it was the ideal mid-range tractor for a wide variety of agricultural and industrial applications.
Despite its age, the Ford 7740 remains a staple on farms and work sites worldwide. Thanks to its straightforward mechanical design and ease of maintenance, owners often choose to refurbish their existing engines rather than replace them with more modern and complex alternatives.
Our remanufactured engines breathe new life into these machines, ensuring they continue running efficiently for years to come.
All engines are built to order, and pricing is based on rebuild of your existing engine by Timik Engines, we can expertly rebuild your Ford 2000 diesel tractor engine, ensuring the highest quality standards.
If an engine is required on an exchange basis, Timik Engines can source an engine to rebuild on an exchange basis and this will incur an additional surcharge. Please contact us with your fuel injection pump number, and the machine model it is fitted to prior to booking your engine in for remanufacture.
The engine block is bored back to standard with new liners fitted. The cylinder head is remanufactured with valve seats re-cut and new valves fitted. The crankshaft is ground to precise tolerances.
All engines are rebuilt in our clean workshop with new pistons and rings, bearings, oil pump, water pump, and complete gasket set. Fuel injection equipment is remanufactured and turbochargers replaced where applicable.
Every engine is dynamometer tested to confirm correct power output, oil pressure, and operating temperatures. Engines are painted and prepared for delivery with full documentation.
Prices exclude VAT.
Ford tractor engine blocks are prone to microscopic pores and casting voids that can allow coolant to seep into the oil over time. Block porosity treatment seals these voids using a vacuum impregnation process, where resin is drawn into any leakage paths and cured under pressure. This significantly extends engine life and reduces the risk of coolant contamination after rebuild. We recommend this treatment for all Ford engines where long-term reliability is a priority.
All engines are supplied on an exchange basis. You send us your existing engine and we return a fully remanufactured unit. If you do not have a donor engine, contact us to discuss surcharge options.
Donor engines must be complete (block, head, crankshaft, and major castings intact). Engines with severe damage may incur additional charges. Contact us before dispatch for assessment.
Timik Agricultural Ltd, Church House Farm, Clewers Hill, Waltham Chase, Southampton, SO32 2LN, United Kingdom